Plug and play voltage stabiliser on ISO power cable

For use when fitting an aftermarket radio in cars with automatic engine 'Start/Stop' technology.

For cars that have a drop in voltage on both ignition and permanent feeds during the engine cranking during the start/stop cycle causing the radio to turn off.

For filtering 12 volt car audio products that have induced noise from alternators and other ignition sources

10 AMP

For filtering 12 volt car audio products that have induced noise from alternators and other ignition sources

30 AMP

For Filtering 12 Volt Car Audio Products That Have Induced Noise From Alternators And Other Ignition Sources.

A pair of Ferrite Clamp/Noise Filter Cable Chokes suitable for cables with a diameter of 3.5mm.

Help reduce electro-magnetic interference (EMI) on AC power lines and improve signal integrity.

A pair of Ferrite Clamp/Noise Filter Cable Chokes suitable for cables with a diameter of 5mm.

Help reduce electro-magnetic interference (EMI) on AC power lines and improve signal integrity.

Helps reduce EMI on AC power lines; 

Easy to install with double snap clips 

Ferrite core with plastic cover; Helps to reduce EMI on AC power lines 

Inner diameter: 5mm

A pair of Ferrite Clamp/Noise Filter Cable Chokes suitable for cables with a diameter of 7mm.

Help reduce electro-magnetic interference (EMI) on AC power lines and improve signal integrity.

A pair of Ferrite Clamp/Noise Filter Cable Chokes suitable for cables with a diameter of 9mm.

Help reduce electro-magnetic interference (EMI) on AC power lines and improve signal integrity.

This power relay cable is to be used when installing a camera into a vehicle.

Sometimes a reverse power feed from a reverse light may not be strong enough to power a camera or may create interference.

This relay can use a weak reverse trigger to switch on a better 12v power feed for a camera or reduce interference.

Requires hardwiring.

Drops 12V DC to 6V DC to provide a suitable power supply to a cars original parking camera.

Use with camera retention interfaces that do not have a voltage dropper built in.

PLEASE NOTE: This is not a camera interface. If you are looking to add or retain a camera please visit our car specific camera interface range

The MGLI Super Mini 2-Channel RCA Stereo Ground Loop Isolator is designed to eliminate ground loop noise, hum, and alternator “whine” between your audio source and car radio. Built using HiFi permalloy transformers, it ensures crystal-clear sound with minimal signal loss. Ideal for car audio systems, factory amp integration, and AUX input setups, it removes pops, clicks, and ignition ticking while maintaining full frequency response. Compact and installer-friendly, this isolator provides a secure fit and easy inline installation for professional, noise-free results.

PLEASE NOTE: For a bulk pack of 10, please use 24-020B

Bulk pack of 10 RCA Stereo Ground Loop Isolators/ Audio Signal Noise Filters (2 Channel)

The MGLI Super Mini 2-Channel RCA Stereo Ground Loop Isolator is designed to eliminate ground loop noise, hum, and alternator “whine” between your audio source and car radio. Built using HiFi permalloy transformers, it ensures crystal-clear sound with minimal signal loss. Ideal for car audio systems, factory amp integration, and AUX input setups, it removes pops, clicks, and ignition ticking while maintaining full frequency response. Compact and installer-friendly, this isolator provides a secure fit and easy inline installation for professional, noise-free results.