Amplifier accessories are essential for reliable, safe, and fully controlled car audio installations. Our range includes remote bass controls, LOCs, ground loop isolators, ANL fuse holders, and remote level controllers.
The Alpine RUX-KNOB2 Remote Bass Control Knob lets you adjust your amplifier’s subwoofer gain directly from your vehicle cabin. Compatible with Alpine amplifiers, it provides quick, convenient control for on-the-fly bass adjustments. Supplied with a 5-meter cable for easy plug-and-play installation, this compact control knob is the perfect addition for fine-tuning your car audio system without leaving your seat.
The JL Audio Logo Badge (0.85") is a premium finishing touch for custom car audio installations. Featuring a black disc with a satin-chrome JL Audio logo, this compact badge is ideal for amplifier racks, subwoofer enclosures, trim panels and bespoke install work. Its subtle size and high-quality finish make it perfect for professional installers and enthusiasts looking to add authentic JL Audio branding without overpowering the design.
The JL Audio DRC-100 is a panel-mount, wired digital remote controller designed for JLid™ compatible JL Audio DSPs and amplifiers, including for use with FiX 82 or FiX® 86 OEM Integration DSP. Featuring a rotary control knob, push-button mode selector and RGB status LED, it provides convenient access to key system functions such as master volume, subwoofer level and preset or mode selection. The exact functionality depends on the connected JL Audio device, making the DRC-100 a flexible and essential control accessory for advanced car audio systems.
The JL Audio DRC-205 is a panel-mount, wired digital remote controller designed for JLid™ compatible JL Audio DSPs and amplifiers. Featuring dual-concentric rotary controls, a push-button mode selector and an RGB status LED, it provides intuitive access to system functions such as master volume, subwoofer level and preset or mode selection. The specific functionality of the DRC-205 is defined by the connected JL Audio device, making it a flexible control solution for advanced car audio systems.
The JL Audio FiX-LSA-4 is a 4-channel load sensing adaptor designed for use with FiX® 82 and FiX® 86 OEM integration DSP processors. It resolves audio muting issues caused by factory amplifiers that require a low-impedance load to enable output. Installed inline between the factory amplifier and FiX DSP, the FiX-LSA-4 provides the correct load impedance, allowing reliable signal transfer and proper system calibration.
The JL Audio HD-RLC remote level control allows precise bass and amplifier level adjustment from the front of the vehicle. Compatible with all HD, XD, MHD, and M-Series JL Audio amplifiers, the HD-RLC kit includes a black ABS rotary control knob, mounting hardware, and an 18 ft (5.5 m) cable for flexible installation. A satin-finish aluminum knob can also be purchased separately for a premium look. Ideal for tuning your audio system without having to access the amplifier directly.
The JL Audio MBT-CRXv3 is a premium Bluetooth® wireless receiver engineered for marine, motorsports and outdoor audio systems. Featuring an IP67-rated water-resistant chassis, Qualcomm® aptX™ HD audio and dual-zone stereo outputs with a dedicated subwoofer feed, it delivers powerful, high-quality wireless streaming in demanding environments. Designed to function as either a stand-alone Bluetooth source unit or an add-on wireless controller, the MBT-CRXv3 offers simple single-hole installation, large backlit controls and independent zone level adjustment for complete system control.
The JL Audio MBT-RXv2 is a compact Bluetooth® wireless audio receiver designed to add high-quality streaming capability to virtually any sound system. Featuring Qualcomm® aptX™ HD audio and 4-volt RMS RCA preamp outputs, it delivers crystal-clear sound directly to amplifiers or source units with line-level inputs. Its sealed, IPX7-rated water-resistant chassis makes it ideal for demanding installations, while simple pairing and automatic reconnection ensure seamless everyday use.
The JL Audio RBC-1 is a premium remote bass control designed to let you adjust subwoofer level or bass EQ boost from the front of your vehicle. Compatible with a wide range of JL Audio amplifiers, including JD, JX, HX, MX, RD, Slash, G, A, e-Series, and M-Series, as well as PowerWedge+ and MicroSub+ subwoofer systems, the RBC-1 provides precise control over your bass performance. The kit includes a rotary control with a black ABS knob, mounting hardware, and an 18 ft (5.5 m) cable for flexible installation.
For Filtering 12 Volt Car Audio Products That Have Induced Noise From Alternators And Other Ignition Sources.
Remote Plus 10 Amp Interface Audio Signal Power Supply (With built-in 12V Relay)
This 2 Channel Line Out Converter (LOC) with Auto Amplifier Amp Turn On feature is designed to enhance your car's audio system by seamlessly integrating aftermarket amplifiers or audio equipment. This versatile device allows you to achieve optimal sound quality and control over your audio experience.
The converter supports various audio input connections, including speaker-level inputs and RCA inputs, making it compatible with a wide range of car audio systems.
Active Plus adjustable 2 channel line out-put converter with 12volt amp turn on circuit.
Use for adding an amplifier to standard speaker wires. (100W) max
RECOIL Programmable Trigger Delay with Four Outputs.
Recoil programmable sequencer ATT4 can be used to turn-on and turn-off couple amplifiers to eliminate any pop noises.
This 4-channel adjustable remote output timer allows you to set up turn-on and turn-off times up to 30 seconds. The built-in amplification feature is designed for boosting the remote-in signal and ensures your system powers on and off smoothly.
Recoil 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.
This interface detects an audio signal and generates an amplifier turn on signal based on this, the amplifier turn on signal stays on for 60 seconds after the audio signal disappears. This allows the amplifier to stay turned on between tracks and during moments of silent audio.
RECOIL Universal amplifier level remote controller with Built-in Digital Voltmeter, Blue LED Display, Remote Gain Control and On/Off Switch.
The MGLI Super Mini 2-Channel RCA Stereo Ground Loop Isolator is designed to eliminate ground loop noise, hum, and alternator “whine” between your audio source and car radio. Built using HiFi permalloy transformers, it ensures crystal-clear sound with minimal signal loss. Ideal for car audio systems, factory amp integration, and AUX input setups, it removes pops, clicks, and ignition ticking while maintaining full frequency response. Compact and installer-friendly, this isolator provides a secure fit and easy inline installation for professional, noise-free results.
PLEASE NOTE: For a bulk pack of 10, please use 24-020B
20 Amp RCA Stereo Ground Loop Isolator/ Audio Signal/ Amplifier Noise Filter
Eliminates ground loop noise between the audio source and radio. Stops alternator "whine" and ignition "ticking".
Used to solve noise problems in Car audio audio systems and AUX in situations.
A pair of gold plated female to female RCA Phono adapters
Use for joining 2x male phono cables together
PLEASE NOTE: For a bulk pack of 10, please use 32-100B
A bulk pack of 10 gold plated female to female RCA Phono adapters
Use for joining 2x male phono cables together
A pair of gold plated male to male RCA Phono adapters
Use for joining 2x female phono cables together, or converting a female socket to a male.
PLEASE NOTE: For a bulk pack of 10, please use 32-101B
A bulk pack of 10 gold plated male to male RCA Phono adapters
Use for joining 2x female phono cables together, or converting a female socket to a male.
PLEASE NOTE: For a bulk pack of 10, please use 32-102B
PLEASE NOTE: For a bulk pack of 10, please use 32-103B
A bulk pack 10 Male to Female Right Angled RCA phono Adapters (5 Red - 5 Black)
Set at a 90 Degree angle, making them perfect for use In tight installation places
Mini ANL fuse holder gold plated (6-20mm2)
For cable protection of 6-20 mm² and a current of 10-150 A.
Note: Please use wire end sleeves for protection to protect the cable strands and for better contact
This RECOIL Mini-ANL inline fuse holder is designed for 4–8 AWG car audio power wiring, ideal for protecting amplifier installations and high-current electrical circuits. It accepts Mini-ANL fuses from 60A to 100A and includes forged brass terminals, a marine-grade satin chrome finish, and a high-temperature polycarbonate housing. Easy to install and perfect for both professional and DIY car audio setups.
The RECOIL Mini-ANL 2-Way Inline Fuse Holder distributes power safely for car audio and amplifier setups. Supports 1×0/2/4?AWG input and 2×4/8?AWG outputs, with 2×60A, 2×80A, 2×100A Mini-ANL fuses for flexible protection. Forged brass terminals ensure maximum power transfer, while the marine-grade chrome finish and high-temperature polycarbonate base provide corrosion resistance and insulation. Easily branch your main power wire to connect multiple amplifiers, delivering a clean, professional, and safe installation.
The JL Audio CL-RLC is a fully active 2-channel remote level control and line driver designed for subwoofer level adjustment or full-range volume control. Featuring differential-balanced inputs and a high-performance preamp circuit delivering up to 7.5 VRMS unclipped output, it ensures clean, noise-free signal transfer. Unlike passive controls, the knob sends only control signals — preserving audio fidelity. Buffered pass-through outputs allow additional amplifiers to receive signal without volume changes, making the CL-RLC ideal for advanced car audio systems requiring precise signal management and flexible installation.
The JL Audio VXi-BTC is a JLid™ Bluetooth® communicator designed to add convenient wireless control and configuration to JL Audio VXi DSP amplifiers. Using Bluetooth® Low Energy, it allows you to wirelessly adjust, tune and configure your amplifier from a compatible smartphone or tablet running JL Audio TüN™ mobile applications. With up to 10 metres of wireless range, compact dimensions and simple JLid™ network integration, the VXi-BTC makes amplifier setup faster and more flexible without adding audio streaming functionality.
The JL Audio VXi-HUB is a powerful system accessory designed to simplify and unify control of multiple JL Audio VXi DSP amplifiers. Acting as both a data networking hub and digital audio distribution centre, the VXi-HUB allows all connected amplifiers to appear in a single TüN® software session, dramatically streamlining setup and tuning. Supporting synchronized system control, JLid™ networking, optional Bluetooth® tuning, and high-resolution optical audio distribution up to 24-bit / 192 kHz, the VXi-HUB is essential for advanced multi-amplifier VXi installations.
© Copyright 2026 InCarTec. All Rights Reserved
