Audi A3 (8P) (2006-2013) Single/Double DIN car stereo upgrade fitting kit (CANbus ignition)

Complete stereo upgrade fitting kit to install a Single/Double DIN aftermarket car stereo in Audi A3 (8P) facelift (2006-2013) car models with CANbus ignition and rear amplified sound systems

This head unit fitting kit includes:

Audi quadlock to ISO radio adapter cable with CANbus ignition interface (20-254-IGN)

This Quadlock to ISO adapter cable with CANbus ignition adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors. The CANbus ignition interface generates a key present ignition supply to the new stereo, this means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel. This interface is built into the Quadlock to ISO harness adapter so installation is plug and play.

The plug and play Quadlock to ISO cable also has a built in high to low level adapter for the amplified speakers.  The adapter allows the new stereo to work with the original amplifier which drives all the speakers in the car and the subwoofer. The adjustable high to low level adapter gives a much cleaner audio signal to the amplifier compared to using line output phono leads.

Antenna adapter cable (21-139)

Double moulded Fakra Aerial adapter cable for European cars that have amplified original antennas. Use with cars that have twin antenna both requiring power. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. Will also provide a power feed to give 12 volt from the car radio to the cars amplified antenna.

Fascia adapter panel (50-271)

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version

Fits Audi A3 (8P) (2003 - 2007) and A3 (8P) facelift/ 8PL (2006 - 2013) car models (For OEM Radios With Rounded Corners)

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

PLEASE NOTE: For a double din installation please use 50-702

The fascia will require a standard 113mm high metal cage as used by most aftermarket head-unit manufacturers. This cage is normally provided with the unit. If not, you will need our cage item number 51-013.

A flush mount PRO-fit style fascia is also available, please see 50-271-PRO

This fitting kit is often Purchased With:

• Single DIN Car Stereo - Single DIN car audio systems are an excellent option for those seeking simplicity and functionality. Typically equipped with basic features like AM/FM radio, CD players, and auxiliary inputs, they serve as a solid foundation for any car audio setup.

• Double DIN Car Stereo - Upgrade your driving experience with our premium selection of Double Din car stereos! These larger, 2 DIN car stereo models not only enhance your vehicle's interior but also deliver an array of interactive features designed for seamless connectivity and entertainment.

• DAB Antenna - Upgrade your car's audio experience with our interior windscreen glass mount DAB radio antenna aerial, designed specifically for aftermarket DAB car radios.

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.