Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel audio controls in Fiat Scudo (2007-2012) and Toyota Proace (2013-2016) car and van models.
The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tones that are usually lost when replacing the original radio.
PLEASE NOTE: Only suitable for vehicles with steering wheel controls and factory parking sensors
This complete head unit fitting kit includes:
Fakra to DIN antenna adapter (21-106)
Male Fakra to Male DIN antenna adapter cable.
This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.
This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.
Steering wheel control and parking sensor retention interface (39-PGA-PDC)
CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio.
This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.
It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.
This interface will also allow you to access the Settings menu on the cars screen menu to change time and date.
PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.
Double DIN fascia adapter trim (50-743)
Radio fascia adapter panel to allow the fitting of an aftermarket Double DIN Car stereo upgrade.
This fascia is a trim piece that covers the radio cage to give a professional finish when installing an aftermarket double DIN radio.
Suitable for Fiat Scudo (2007-2012) and Toyota Proace (2013-2016) car and van models.
COLOUR: MATT BLACK
103mm high Double DIN cage kit (51-012)
Car audio metal cage kit 103mm high. This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes.
Complete with fixings to attach to the new car radio body.
PLEASE NOTE: Only suitable for vehicles with steering wheel controls and factory parking sensors
This fitting kit is often Purchased With:
- Double DIN Car Stereo - Upgrade your driving experience with our premium selection of Double Din car stereos! These larger, 2 DIN car stereo models not only enhance your vehicle's interior but also deliver an array of interactive features designed for seamless connectivity and entertainment.
- DAB Antenna - Upgrade your car's audio experience with our interior windscreen glass mount DAB radio antenna aerial, designed specifically for aftermarket DAB car radios.
- Trim Panel Tool Set - A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Fiat - Scudo 2nd Gen (2007 - 2012)
Toyota - ProAce (2013 - 2016)
