Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket car stereo and retain the use of the steering wheel audio controls in select Porsche Cayenne car models with CDR30/ PCM3.0 systems (Quadlock connection) with Bose audio.
This head unit fitting kit includes:
Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket car stereo and retain the use of the steering wheel audio controls in select Porsche Cayenne car models with CDR30/ PCM3.0 systems (Quadlock connection) with Bose audio.
PLEASE NOTE: For Porsche models with STANDARD audio please use FK-324-QUAD
This head unit fitting kit includes:
Male Fakra to DIN antenna adapter (21-106)
Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.
This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.
MOST fibre optic BOSE amplifier retention (23-240)
MOST fibre optic interface designed to retain the use of the original Bose fibre optic amplifier in Porsche Boxster, Cayman, 911 and Cayenne cars fitted with original CDR23 CDR24 PCM2, PCM2.1 and PCM3 head units to allow the fitting of an aftermarket radio upgrade.
The interface connects at the back of the radio, it takes the phono audio output from the new radio and converts it to a digital signal that works with the original Bose amplifier. Note, the front to rear fade feature will be lost.
This interface is to retain audio with the Bose amplifier only, it does not generate an ignition power supply or retain the use of the steering wheel controls.
Steering wheel control interface (39-PO-QUAD)
PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.
Double DIN fascia fitting kit (50-324)
COLOUR: MATT BLACK
Double DIN radio cage (51-012)
Car audio metal cage kit and trim 103mm high.
Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.
This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes.
Complete with fixings to attach to the new car radio body.

This fitting kit is often Purchased With:
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Porsche - Cayenne 1st Gen Facelift (957) (2007 -2009)
© Copyright 2026 InCarTec. All Rights Reserved