NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Steering wheel control interface and adapter cable designed for Range Rover P38 (1995-1998) car models with a factory standard Clarion head unit.
The cable adapts from the original connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip and source buttons.
NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Steering wheel control interface and adapter cable designed for Range Rover P38 (1995-1998) car models with a factory standard Clarion head unit.
The cable adapts from the original connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip and source buttons.
Installation Notes
This car has an amplified system using a 10 way ISO connector (Pink in car) with low level inputs from the radio to the amplifier.
To drive this amplifier please use part number 20-274 along with our code 29-659 or use complete item 29-659-HK
An additional patch lead is required for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
| Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
| JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
| Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
| Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
| Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
| Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Landrover - Range Rover II (P38A) (1994 - 2002)
© Copyright 2026 InCarTec. All Rights Reserved
