Complete fitting kit to install a Double DIN aftermarket car stereo head unit and retain the original USB and steering wheel controls in Toyota Yaris (2017-2020) car models.
This head unit fitting kit includes:
Toyota to DIN car aerial antenna adapter (21-147)
This cable adapts from the 2009 onward style Toyota antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade.
The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car.
Toyota USB port retention cable (24-253)
Cable to retain the use of the original USB port when replacing the original head unit.
Steering wheel control interface (29-695)
Steering wheel control interface and adapter cable for various Toyota and Lexus cars made after 2012
The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.
The cable also provides a speed pulse signal to the new stereo.
Universal SWC patch lead (29-025)
Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.
Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.
Toyota Yaris (2017-2020) Double DIN fascia (50-624)
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version.
The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.
Toyota Yaris (2017-2020) car models where the original radio is integrated into the fascia that surrounds the hazard switch, seatbelt and airbag lights.
COLOUR: MATT BLACK
103mm double din fitting cage kit (51-012)
This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes.
Complete with fixings to attach to the new car radio body.
This fitting kit is often Purchased With:
- Double DIN Car Stereo - Upgrade your driving experience with our premium selection of Double Din car stereos! These larger, 2 DIN car stereo models not only enhance your vehicle's interior but also deliver an array of interactive features designed for seamless connectivity and entertainment.
- DAB Antenna - Upgrade your car's audio experience with our interior windscreen glass mount DAB radio antenna aerial, designed specifically for aftermarket DAB car radios.
- Trim Panel Tool Set - A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Toyota - Yaris (2012 - 2020)
