Vehicle audio solutions since 2001

01392 829435

InCarTec Products > AUDIO SW CONTROL

Vauxhall Astra J, Mokka, Meriva B, Zafira Tourer CAN steering control interface

29-CTVX01
Price: £86.66 (£103.99 inc VAT)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Also allows the steering wheel buttons to access the original menu system on the cars display. This interface will also retain the vehicle chimes and OEM phone buttons (if equipped)

PLEASE NOTE: Not suitable for cars with original navigation screens

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Also allows the steering wheel buttons to access the original menu system on the cars display.

This interface will also retain the vehicle chimes and OEM phone buttons (if equipped)


Key Features

• Retains Steering Wheel Controls (if equipped)

• Retains Vehicle Settings Menu (if equipped)

• Retains OEM Phone Buttons (if equipped)

• Retains Vehicle Chimes (if equipped)


Compatible Vehicles

  • Vauxhall/ Opel Adam (M-A) 2013 - 2017
  • Vauxhall/ Opel Astra (J) 2010 - 2015
  • Vauxhall/ Opel Corsa (E) 2014 - 2019
  • Vauxhall/ Opel Meriva (B) 2010 Onwards
  • Vauxhall/ Opel Mokka (2012 Onwards)
  • Vauxhall/Opel Zafira Tourer (2012 Onwards)


Compatibility Notes

  • An additional speaker box is included with the interface, this retains the original parking sensor tones, indicator clicks and other warning chimes
  • Not suitable for cars with original navigation screens


For Installation into Vauxhall Meriva Vehicles

If steering wheel control functions are unresponsive after installation, press the ‘Track Down’ repeatedly 8 times until an audible beep is heard.  This confirms the interface has switched to the Meriva protocol.

To reverse this back to non Meriva protocol, repeat the process above.


Dip Switch Settings

Before installation, make sure that the dipswitches on the interface are set according to the below information:

Set Dipswitch 1 to ‘On’ if installing a Pioneer aftermarket stereo, and ‘Off’ if installing a Sony aftermarket stereo. If installing any other brand of stereo, Dipswitch 1 can be set to any position

Set Dipswitch 2 to ‘On’ if installing the product into a vehicle with 2 Line Display, and ‘Off’ if installing into a vehicle with 4 Line Display

Dipswitches 3 & 4 have no functionality with this product and can be left in their default positions


PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Radio Being Fitted
Part Number
Short Description
Pioneer
29-CT-007
Patch lead for 29-CT Series Steering wheel control for Pioneer stereos.
Universal29-CT-025
Universal patch lead for 29-CT series steering controls for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese/ Unbranded stereos.

Brand: InCarTec

Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Holden - Astra (PJ) (2015 - 2016)
Vauxhall / Opel - Adam (2013 - 2019)
Vauxhall / Opel - Astra J (2010 - 2015)
Vauxhall / Opel - Corsa E (2014 - 2019)
Vauxhall / Opel - Meriva B (2010 - 2017)
Vauxhall / Opel - Mokka 1st Gen (2012 - 2020)
Vauxhall / Opel - Zafira Tourer (2013 - 2019)

Browse our products by category

Carplay & Android Auto
Car Stereos and Head Units
Car Stereo Fitting Parts
Car Stereo Universal Parts
Aerials and Antenna Adapters
AUX, USB, RCA
Bluetooth kits and Fitting
Car Stereo Spares/ OEM Parts
Car Speakers & Upgrade Kits
Speaker Fitting Parts
Car Audio Amplifiers & Fitting Kits
Car Subwoofers
BLAM Audio
Recoil Audio
Camera Integration (Adding/Retaining)
Commercial, Van and Leisure
Parking Sensors
Dash Cams
Car LED Lighting
Workshop Trade Parts
Sale