BLAM Signature 200 S2 200mm (8") 300W 2-Way component car speaker system

Elevate your car audio experience with the BLAM KIT 200 S2, a premium two-way component system designed for rich, precise sound reproduction. It includes two 8″ (200 mm) S8.100 woofers with ultra-rigid carbon fiber cones in cast aluminum baskets, and two 25 mm T25S textile dome tweeters with neodymium magnets and machined aluminum faceplates. The included BFT01 crossovers offer 6 dB/octave high-pass filtering and tweeter level adjustment, providing seamless integration and clarity from bass to treble. Sold globally by InCarTec, UK distributor for BLAM Audio, and featured by professional car audio installers.

Key Features:

• 8″ (200 mm) S8.100 carbon fiber woofers: 2 Ω, 300 W max / 150 W RMS, 50 Hz–3.8 kHz
• 25 mm T25S textile dome tweeters: 5 Ω, neodymium motor, textured aluminum front
• BFT01 6 dB/octave crossovers with tweeter level switch (0 dB / –3 dB)
• Cast-aluminum baskets, NBR surrounds, long-life Conex spiders, 38 mm VC on fiberglass support
• Gold-plated terminals and precision tuning for audiophile-grade car audio systems

Composition:

2 X S8.100 HIGH POWER WOOFERS/ SPEAKERS

• 200 mm (8 inch) Speakers/ Woofer
  
• Mounting depth 67 mm
• Maximum power 300 W
• Nominal power 150 W
• Frequency response 50 Hz – 3.8 kHz
• Sensitivity 93.4 dB – Impedance 2 Ω
• Die-cast aluminium basket
• Ultra-rigid carbon-fibre membrane
• NBR surround
• Long-life “conex” spider
• 38 mm voice coil on fiberglass former
• Oversized magnetic motor 100 × 20 mm
• Gold-plated terminal block.

2 x T25S HIGH DEFINITION TWEETERS

• 25 mm (1 inch) soft dome tweeter
• Maximal power 100 W
• Nominal power 15 W
• Frequency response 2.5 kHz – 30 kHz
• Sensitivity 90.7 dB – Impedance 5 ohms
• Mounting depth 14.5 mm (0.6’’)
• 5 ohms, Neo magnet
• 25 mm (1″) textile dome diaphragm
• Precision machined aluminum front panel
• Sound transparent protective grille

2 x BFT01 HIGH QUALITY CROSSOVERS

• 12 dB/octave high-pass crossover
• Tweeter level adjustable to +3 dB, 0 dB or -3 dB
• Crossover frequency: 4.5 kHz

S8.100 Technical Specifications Sheet

T25S Technical Specifications Sheet

You might also require (Sold Separately)

• Trim Panel Tool Set - A must have for any installer who has to remove plastic trims, to avoid damage to the delicate finishes on both interior and exterior dashboards and panels. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
• Speaker Grilles - If your car speakers are exposed then use speaker our 165mm Grilles for a more discrete appearance and offer a form of protection to kicks and knocks.
• Sound Deadening - Sound deadening can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
• Sound Deadening Tool - Professional sound deadening roller tool designed to allow even pressure when applying sound deadening on the surface of the car, minimising air bubbles and helping to achieve the best possible adhesion. 
• Speaker Baffles - Designed to fit any 165mm speaker, these adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of the speakers from having a negative effect on sound quality.
• Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.

• Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.