FK-968/1 Kit Contents

This stereo upgrade fitting kit contains:

Fakra to DIN antenna adapter cable (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering wheel control interface (29-722)

Steering wheel control interface and adapter cable for Ford Transit, Transit Custom and Transit Connect vans without a separate  display above the radio.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: ONLY SUITABLE FOR TRANSIT RADIOS WITHOUT THE DISPLAY ON TOP OF THE DASH

29-Series Universal patch lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces.

Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Ford Transit (2014–2019) Single/ Double DIN Car Stereo Fascia Without Display (50-968)

Compatibility note:

• This fascia cannot retain the top display on Transit models that are equipped with one
• If installed in vehicles with an upper display, the top display will be lost
• Only suitable for vehicles without a display above the original radio

Additional Switches

Different switches may be required depending on the trim level and model variant. On some vehicles, the original lock and hazard switch cannot be retained, so a replacement switch panel is required (FORD-F1519127).

An additional airbag light unit or blanking plate is also required. If the vehicle originally had a passenger airbag status light in the radio panel, a replacement airbag status light unit (FORD-F1799698) must be fitted, as failure to refit one will cause airbag warning lights to appear on the instrument cluster. If the vehicle did not have a passenger airbag status light, then a blanking plate (FORD-F1832265) is required to fill the space in the new fascia.

We stock all of these options, but they are sold separately. Please check your existing switch setup carefully before purchasing.

See the image below for examples of the components fitted into a fascia.