JBL CLUB 605CSQ - 6.5-Inch (165mm) 2-Way Car Component Door Speakers | 570W

The JBL Club 605CSQ 6.5" Component Car Speakers are designed to deliver high-quality sound performance for serious car audio upgrades. This 2-way component system includes separate woofers, tweeters and external crossovers, allowing for improved sound staging and more precise audio reproduction compared to standard coaxial speakers.

The system features JBL’s carbon fibre Plus One™ woofer cones, which increase cone area for improved bass response and efficiency. Combined with edge-driven silk dome tweeters, the speakers deliver smooth, detailed high frequencies without harshness, even at higher volumes.

With high sensitivity (around 93dB) and 3-ohm impedance, the Club 605CSQ speakers are designed to extract more power from factory head units, delivering strong output without requiring an amplifier. They handle approximately 95W RMS (up to 285W peak) and offer a wide frequency response of around 48Hz – 21kHz, ensuring balanced sound across low, mid and high frequencies.

Installation is made easy with JBL’s Starfish™ mounting adapters and I-Mount™ tweeter system, allowing flexible placement of tweeters in factory locations or custom positions such as A-pillars. The included crossovers ensure accurate frequency separation, helping optimise overall system performance.

JBL CLUB 605CSQ Key Features:

• 6-1/2" component speaker system includes two woofers, two tweeters, and two crossovers
• carbon fiber Plus One™ woofer cone with rubber surround
• edge-driven silk dome tweeter with adjustable output level (0, +3 dB)
• includes tweeter mounting hardware
• handles up to 95 watts RMS (285 watts peak power)
• frequency response: 48-21,000 Hz
• impedance: 3 ohms
• sensitivity: 93 dB at 2.83 volts
• woofer top-mount depth: 2-1/16"
• grilles included
• warranty: 1 year

JBL CLUB 605CSQ Box Contents:

• 2 Woofers
• 2 Tweeters (each has attached 6" speaker leads)
• 2 Crossovers
• 2 Woofer grilles
• 2 JBL Grille badges
• 2 Woofer mounting brackets
• 2 Tweeter flush-mount housings
• 2 Threaded flush-mount adapters
• 2 Plastic locking nuts
• 2 Tweeter surface-mount housings
• 2 Starfish tweeter mounts
• Eight 1-3/8" Screws
• Eight 1" Screws
• Eight 1/2" Screws
• 8 Speed clips
• Six 5/8" Flat head screws
• 2 Washers
• Two M4 Nuts
• 2 Adhesive backed foam gaskets
• Installation manual
• Specs and Template on box